document updated 18 years ago, on Apr 5, 2006
AN1 Analog input (either to the A/D converter, or to the comparator)
CCP1 Capture1 input / Compare1 output / PWM1 output
CK USART Synchronous Clock
DT USART Synchronous Data
INT External Interrupt Pin
MCLR Master Clear (Reset)
PGC Clock line for use when Programming
PGD Data line for use when Programming
PGM start Programming (to initiate Low Voltage Programming)
PSP1 Parallel Slave Port
RA0/RB0/RC0/RD0 Bidirectional I/O Port
RX Receive line for USART
SCK Synchonous Serial Clock (for SPI)
SCL I2C clock
SDA Data I/O (for I2C)
SDI SPI Data In
SDO SPI Data Out
SS Slave Select (for SPI)
T0CKI Clock Input to Timer0
T1OSI Timer 1 Oscillator Input
TX Transmit line for USART
VREF Voltage Reference